Mostrando 13-24 de 80 resultados
Thermoplastics resin body, galvanized steel housings
Operating temperature -30 ºC a +50 ºC.
2, 4 and 6 poles motor. 230 V 1 Ph / 400 V 3 Ph
Ambient temperature range -30°C - +85°C
Insulation resistance over 100 Mega Ohm tested by a resistor at DC 500V
Insulation isolation grade F, Protection grade IP44.
Performance 400 mt³/hr. to 2.650 mt³/hr.
Ambient temperature range -25°C - +70°C
Insulation isolation grade B, Protection grade IP44.
Performance: Up to 14.300 mt³/hr.
6 and 8 poles motor. 400 V 3 Ph
Insulation isolation grade B. Protection grade IP44.
Performance 12.700 mt³/hr. to 16.000 mt³/hr
6 to 23 Watt power
Axial fan blades in aluminium, 154mm to 350mm diameter
Two types of motors - EA/EB : Electronic commutated or ES: High efficency PSC
Housing: PA66 - Glass filled, Die-casting alluminum body
Protection IP-44 on request IP-54
Voltage Range: 220V - 50/60 Hz, on request 115V- 50/60 Hz
Operating temperature -40 +50°C
4 to 34 watt power
220 V 50/60 Hz.
Insulation B, Protection IP42
Marked: CE according to EN.60335.1 / VDE according to EN. 60335.2.24
4 and 6 pole shaded pole motors, 1.5 to 35 watt power.
4 and 6 pole shaded pole motors with capacitors, 36 to 30 watt power.
3 Phase motors 4 and 6 pole, power up to 350 watt.
Manufacture request with special voltages and frequencies.
Blades made to order for a wide range of application
Blades with various types of materials, ABS + Fiber, Polyamide, Polyethylene, etc.
6mm thick tempered glass
Constant curve radius 1016mm
Development of 738mm curved internal / external 743mm.
Constant curve radius 1016mm.
Powers from 300 Newton to 800 Newton
Special products on demand
Stainless Steel allen screw
Temperature settings: Cold 16ºC - 30ºC, Heat 16ºC - 32ºC
Compressor relay contact output of 25 Amp. 250 Vac
Fan speed relay contact output of 3 Amp. 250 Vac (03 Fan speed)
4-Way Valve relay contact output of 3 Amp. 250 Vac
110 - 220 V 50/60 Hz. selectable direct conection
Fan speed automatic option. (according to the temperature settings at)