Español
Since 1995, Vento Ltd. is commited to import, represent and sell components required at Industrial Refrigeration and Air Conditioning business.
Among our current supplier companies in Europe and Asia, we can highlight:
Ma-Vib S.p.A. (Italy) Manufacturer of fans for the refrigeration industry, Taiwan DEI Controls (Taiwan) Digital temperature controllers and programmers, Northglass Industrial Co., Ltd (China) Tempered, laminated, curved and safety glass, Transfer-Oil (Italy ), thermoplastic hoses for CO2 and refrigerant gases. Multi-Wing (Spain), Industrial blades, Ferro-Frio (Spain) locksmith for the refrigeration industry, Calorfelx (Italy) heaters for defrosting, Coldtech (Italy) locks and sliding systems for refrigeration, ARCO Industries (Italy) sectional doors and hydraulic ramps. Stabilus (Germany) hydraulic shock absorbers.
In addition to products listed in our suppliers's catalogs, we offer specific solutions, tailored to the requirement of each client. Currenlty we have as OEM solutions:
• Hydraulic gas springs for curved tempered glass mechanism operation.
• Defrost systems.
• Curved and flat tempered glass.
• Walk-in-Cooler doors.
Aluminium fin and cooper tube
3.2mm fin space
Aluminium fin and cooper tube
3.2mm fin space
Aluminium fin and cooper tube
3.2mm fin space
15 mt² transfer surface
4.4 Kw. nominal power
1 External Rotor Fan 350mm diameter, 70/140 Watt, 220 Volt
19 mm Inlet, 16mm Outlet
480 mm long x 480mm high x 180mm deep (measured without fan)
22 mt² transfer surface
6.4 Kw. nominal power
1 External Rotor Fan 400mm diameter, 110/180 Watt, 220 Volt
19 mm Inlet, 16mm Outlet
520 mm long x 530mm high x 200mm deep (measured without fan)
22 mt² transfer surface
8.1 Kw. nominal power
02 External Rotor Fan 350mm diameter, 70/140 Watt, 220 Volt
19 mm Inlet, 16mm Outlet
930 mm long x 480mm high x 180mm deep (measured without fan)
33 mt² transfer surface
9.6 Kw. nominal power
02 External Rotor Fan 400mm diameter, 110/180 Watt, 220 Volt
19 mm Inlet, 16mm Outlet
930 mm long x 530mm high x 200mm deep (measured without fan)
Aluminium fin
Copper tubes expanded by hydraulic process
Fin space between 6 to 10mm.
Special dimensions by request
Aluminium fin
Copper tubes expanded by hydraulic process
Standar fin space 9mm.
Special dimensions by request
Imported product
DD series application range, for camera from -15 to -18 ° C
DD series power range, from 1300 watt to 56000 watt
Electric defrosting
External rotor fans
DJ series application range, for camera below -25 ° C
DJ series power range, from 1390 watt to 35900 watt
Electric defrosting
External rotor fans
40 watt a 570 watt power
350mm to 500mm impler diameter
220 V 50/60 Hz. or 400 Volt 50/60 Hz.
Insulation B, Protection IP42
Marked: CE according to EN.60335.1 - VDE according to EN. 60335.2.24
Double high precise ball bearings
Ambient temperature range -20°C - +70°C
Insulation resistance over 100 Mega Ohm tested by a resistor at DC 500V
Insulation isolation grade B, Protection grade IP54
Material Frame : Die-Casting ADC12 Aluminium Alloy, finished by black paint, anti-corrosion, anti-oxidization.
Material Impeller: Made by inyection mould with black plastic PBT+ 30% glass fiber + VO class anti-burning liquid.
Power Connection UL3266 Lead wire.
Life test : 25°C 60.000 hours (with ball bearings)
Thermoplastics resin body, galvanized steel housings
Aluminium impeller
Operating temperature -30 ºC a +50 ºC.
2, 4 and 6 poles motor. 230 V 1 Ph / 400 V 3 Ph
Ambient temperature range -30°C - +85°C
Insulation resistance over 100 Mega Ohm tested by a resistor at DC 500V
Insulation isolation grade F, Protection grade IP44.
Performance 400 mt³/hr. to 2.650 mt³/hr.
2, 4 and 6 poles motor. 230 V 1 Ph / 400 V 3 Ph
Ambient temperature range -25°C - +70°C
Insulation resistance over 100 Mega Ohm tested by a resistor at DC 500V
Insulation isolation grade B, Protection grade IP44.
Performance: Up to 14.300 mt³/hr.
6 and 8 poles motor. 400 V 3 Ph
Insulation isolation grade B. Protection grade IP44.
Performance 12.700 mt³/hr. to 16.000 mt³/hr
6 to 23 Watt power
Axial fan blades in aluminium, 154mm to 350mm diameter
Two types of motors - EA/EB : Electronic commutated or ES: High efficency PSC
Housing: PA66 - Glass filled, Die-casting alluminum body
Aluminium impeller
Protection IP-44 on request IP-54
Voltage Range: 220V - 50/60 Hz, on request 115V- 50/60 Hz
Operating temperature -40 +50°C
4 to 34 watt power
CCW rotation
220 V 50/60 Hz.
Insulation B, Protection IP42
Marked: CE according to EN.60335.1 / VDE according to EN. 60335.2.24
4 and 6 pole shaded pole motors, 1.5 to 35 watt power.
4 and 6 pole shaded pole motors with capacitors, 36 to 30 watt power.
3 Phase motors 4 and 6 pole, power up to 350 watt.
Manufacture request with special voltages and frequencies.
Blades made to order for a wide range of application
Blades with various types of materials, ABS + Fiber, Polyamide, Polyethylene, etc.
6mm thick tempered glass
98% Transparency.
Polished edge.
Constant curve radius 1016mm
Development of 738mm curved internal / external 743mm.
6mm thick tempered glass
98% Transparency.
Polished edge.
Constant curve radius 1016mm.
Development of 738mm curved internal / external 743mm.
Powers from 300 Newton to 800 Newton
Special products on demand
Aluminum Construction
Bronze bushings
Stainless Steel allen screw
Aluminum profile
For 6mm thick glass
Light gray natural anodized
PVC sanitary weather stripping (sold separately)
Temperature settings: Cold 16ºC - 30ºC, Heat 16ºC - 32ºC
Tolerance 1ºC
Compressor relay contact output of 25 Amp. 250 Vac
Fan speed relay contact output of 3 Amp. 250 Vac (03 Fan speed)
4-Way Valve relay contact output of 3 Amp. 250 Vac
110 - 220 V 50/60 Hz. selectable direct conection
Fan speed automatic option. (according to the temperature settings at)
Temperature range : -40ºC a +40ºC
Tolerance 0,5ºC
Relay contact output of 7 Amp. 250 Vac
Connection via 12-volt transformer 220 / 12 V including
02 NTC sensor 1,5 mt. length
Operating temperature 1ºC to 50ºC
Tolerance 1ºC
Relay contact output of 7 Amp. 250 Vac
110 - 220 V 50/60 Hz. selectable direct conection
Temperature range -40 °C a +70°C, 0.5 °C resolution
Input voltage 110-240 Volt
Compressor relay contact output of 1.5 Hp. to 220 Volt
Defrost relay contact output of 15 Amp. 250 Vac
Fan relay contact output of 3 Amp. 250 Vac
Light relay contact output of 3 Amp. 250 Vac
DEFOG relay contact output of 15 Amp. 250 Vac
Output alarm contact (NO)
(Accesory) External display with 3 mt. cable, extendable up to 30 mt.
15 Preset Programs
Full programmable
Temperature range : -40ºC a +40ºC
Tolerance 1ºC
Compressor relay contact output of 25 Amp. 250 Vac
Defrost relay contact output of 25 Amp. 250 Vac
Relay contact output to Fans, Lights and Defrost framework of 7 Amp. 250 Vac
110 - 220 V 50/60 Hz. selectable direct conection
02 NTC sensor 1,5 mt. length
Temperature range : -45ºC a +45ºC
Tolerance 1 ºC
NTC sensor 1,5 mt. length
220 Volt / 50 Hz. Direct conection.
Temperature range : -45ºC a +45ºC
Tolerance 1 ºC
NTC sensor 1,5 mt. length
220 Volt / 50 Hz. Direct conection.
Compressor LED function indicator
Defrost LED function indicator
Temperature range : -40ºC a +45ºC
Differential tolerance 0.5 ºC
NTC sensor 1,5 mt. length
220 Volt / 50 Hz. Direct conection.
Defrost by compressor stop time programmable
Temperature range : +30ºC a +110ºC
Tolerance 0,5ºC
NTC sensor 1,5 mt. length type S5 (NTP conection)
Connection via 12-volt transformer 220 / 12 V including
Relay contact output of 8 Amp. 250 Vac
Temperature range : -40ºC a +40ºC
Tolerance 1ºC
Compressor relay contact output of 25 Amp. 250 Vac
Relay contact output to Fans, Lights and Defrost framework of 7 Amp. 250 Vac
110 - 220 V 50/60 Hz. selectable direct conection
NTC sensor 1,5 mt. length
Temperature range : -45ºC a +55ºC
Tolerance 1 ºC
NTC sensor 1,5 mt. length
Connection via 12-volt transformer 220 / 12 V including
Relay contact output of 25 Amp. 250 Vac
02 Free switches for Compressor and lights on (10 Amp.)
Input to 100 ~ 240 Vol 50/60 Hz.
Programming 144 cycles daily x 7 days 1008 total cycles a week
10 minutes Cycles
Mode: On - Off and Auto
Real time clock, accurancy 30 seconds / month
Output of 15 Amp. resistive at 240VAC
Backlight screen
Power reserve for the real time clock: 120 Hr.
Input to 100 ~ 240 Vol 50/60 Hz.
Programming 144 cycles daily x 7 days 1008 total cycles a week
Two control systems independently
10 minutes Cycles
Mode: On - Off and Auto
Real time clock, accurancy 30 seconds / month
Output of 15 Amp. resistive at 240VAC
Backlight screen
Power reserve for the real time clock: 120 Hr.
Power suply 110V - 240V 50/60 Hz
Temperature reading range 10°C - 35°C
Input: Button dsiplay x 6 and Selective RC-F1 remote controler
Compressor relay 25 (7) A /250V
Fans speed contacts 3A/250V x 3
Swing or heater contact 1A/250V
Temperature settings: Cold 16ºC - 30ºC, Heat 16ºC - 32ºC
Tolerance 1ºC
Compressor relay contact output of 25 Amp. 250 Vac
Fan speed relay contact output of 3 Amp. 250 Vac (03 Fan speed)
4-Way Valve relay contact output of 3 Amp. 250 Vac
110 - 220 V 50/60 Hz. selectable direct conection
10 ohm/m to 20.000 ohm/m
Manufactured from 3.0mm silicone cable
Optional mesh tinned copper protection
Available Lengths 3.7 - 5.5 - 8.0 - 11.0 mt. , Other lengths on request
Standard output of 20 Watt / mt.
800 Watt/m. - 220 Volt. Standar Power
Vulcanized endings
Neoprene rubber cable and vulcanization
Multiple Configurations: Double rod, single rod, rod type U
Special products on demand
Italy - Manufacturer
Mono-outlet heating cables
Design, manufacture and testing in compliance with harmonized standards EN 60335
In compliance with 2006/95/EEC DIRECTIVE
CE declaration of conformity on all items
Inner chamber air pressure balancing valve, applicable to negative temperature cold rooms up to 500 m3
With electrical heater from 36 W at 230 V. For wall installation.
Inner chamber air pressure balancing valve, applicable to negative temperature cold rooms up to 20 m3
With electrical heater from 7 W at 230 V. For wall installation.
Conventional sealed oil separator
Oil separator with flange.
Helicoidal oil separator
Convencional and removable from 3/8 "to 2 1/8" I.D.
Helicoidal oil separator from 1/2" to 3 5/8" I.D.
Capacity 1.1 to 21 Lt.
Vertical liquid receiver
RSPCL-BW horizontal liquid reveicer
RSPCL-BL series vertical liquid receiver
From 30 to 320 Lt. capacity
For use with HFFC and HFC refrigerants
Capacities from 2.5 Lt to 24 Lt.
Maximum working pressure 3.1 MPa
Burst Pressure 19 MPa
Working temperature -40 ° C - +120 ° C
1.5 Hp. 220 Volt.
Free Air displacement 20 CFM
Capacity of 295 Watt to -23.3 °C T° Evaporation and +54 °C T° Condensation
Absorbed Power 202 Watt
Consumption 0.96 Amp
10.5 cc displacement
Working range 0 °C to -35 °C
Voltaje 220V-240V/50Hz
Staring capacitor and mechanical relay
Capacity of 360 Watt to -23.3 °C T° Evaporation and +54 °C T° Condensation
Absorbed Power 234 Watt
Electrical consumption 1.05 Amp.
12.8 cc dsiplacement
Working range 0 °C to -35 °C
Voltaje 220V-240V/50Hz
Staring capacitor and mechanical relay
Capacity of 430 Watt to -23.3 °C T° Evaporation and +54 °C T° Condensation
Absorbed Power 331 Watt
Electrical consumption 1.53 Amp.
15.8 cc dsiplacement
Working range 0 °C to -35 °C
Voltaje 220V-240V/50Hz
Staring capacitor and mechanical relay
Capacity of 210 Watt to -23.3 °C T° Evaporation and +54 °C T° Condensation
Absorbed Power 168 Watt
Consumption 0.79 Amp
7.6 cc displacement
Working range 0 °C to -35 °C
Voltaje 220V-240V/50Hz
Staring capacitor and mechanical relay
Capacity of 245 Watt to -23.3 °C T° Evaporation and +54 °C T° Condensation
Absorbed Power 202 Watt
Consumption 0.84 Amp
8.3 cc displacement
Working range 0 °C to -35 °C
Voltaje 220V-240V/50Hz
Staring capacitor and mechanical relay
Reciprocating compressors from 2 Hp up to 7 Hp.
Single-phase and three-phase versions
Applications for medium and low T °
All versions with rotalock valve connection
Single phase version with electrical box included
Right-left reversible.
ABS construction plus fiberglass .
Capacity for doors up to 80 kl (with 2 hinges).
ABS plus Fiberglass construction
Includes key-lock
For doors with thickness from 50 mm to 150 mm
Safety inner release
Made in Italy
Reversible handle for opening to the right or left.
For doors from 70mm to 120mm thickness
Construction in ABS, Aluminum and Stainless Steel.
Fixing screws and rivets in stainless steel
Aluminum handle with ABS terminals
ABS plus Fiberglass construction
Capacity for doors up to 80 kl (with 2 hinges)
Reversible handle for opening to the right or left.
For doors from 80mm to 120mm thickness
Construction in reinforced composite, Aluminum and Stainless Steel.
Made with ABS
Handle with deep adjustment
Manufactured: Aluminium injected by pressure.
Finish: Enamelled: electrostatic thermoconvertible paint gray color.
ABS plus Fiberglass construction
With pin for 96mm
Butyl rubber frame seal
Profile complement AV-003-V7
Nylon Bolt Installation Guide
Product in Stock
Own design and development
Complement of door and frame profiles
100mm thick aluminum door profile
Designed to assemble in a prefabricated panel
Specific contour weatherstrip (sold separately)
Fixing by screws. The profile has a cover to protect the screws from view.
Product in stock
70mm thick aluminum door profile
Designed to assemble in a prefabricated panel
Specific contour weatherstrip (sold separately)
Fixing by screws. The profile has a cover to protect the screws from view.
Product in stock
PVC profile to combine with aluminum profile for refrigerated doors
Black color
45mm height
Assembly with MTH sliding systems
Reinforcements on all sides, for fixing guides and hinges
Space for frame heater, with cover in the same material
Product in Stock
Own design and development.
Profile AV007-1 gasket holder in 3.5m strips
Compatible with ISE00007, ISE000009 and ISE000014 gaskets
To be used in combination with panel door profile 100mm
Co-extruded EPDM gaske
To be used in combination with a 100 mm panel door profile, a 70 mm panel door profile or a U-profile for gasket
To be used in combination with panel door profile 100mm
Anodized aluminum construction
Side guide that prevents derailment of the upper wheel
Complete system of PVC gaskets
Includes outer and inner handle
System for doors up to 200 Kl
Adjustable system for doors from 800 mm to 1700 mm wide
Construction in anodized aluminum profiles
Lateral guide and upper brake that prevents the car from derailing
For doors up to 100 Kl.