Thermoplastics resin body, galvanized steel housings

Aluminium impeller

Operating temperature -30 ºC a +50 ºC.

2, 4 and 6 poles motor. 230 V 1 Ph / 400 V 3 Ph

Ambient temperature range -30°C - +85°C

Insulation resistance over 100 Mega Ohm tested by a resistor at DC 500V

Insulation isolation grade F, Protection grade IP44.

Performance 400 mt³/hr. to 2.650 mt³/hr.

2, 4 and 6 poles motor. 230 V 1 Ph / 400 V 3 Ph

Ambient temperature range -25°C - +70°C

Insulation resistance over 100 Mega Ohm tested by a resistor at DC 500V

Insulation isolation grade B, Protection grade IP44.

Performance: Up to 14.300 mt³/hr.

6 and 8 poles motor. 400 V 3 Ph

Insulation isolation grade B. Protection grade IP44.

Performance 12.700 mt³/hr. to 16.000 mt³/hr

6 to 23 Watt power

Axial fan blades in aluminium, 154mm to 350mm diameter

Two types of motors - EA/EB : Electronic commutated or ES: High efficency PSC

Housing: PA66 - Glass filled, Die-casting alluminum body

Aluminium impeller

Protection IP-44 on request IP-54

Voltage Range: 220V - 50/60 Hz, on request 115V- 50/60 Hz

Operating temperature -40 +50°C

4 to 34 watt power

CCW rotation

220 V 50/60 Hz.

Insulation B, Protection IP42

Marked: CE according to EN.60335.1 / VDE according to EN. 60335.2.24

4 and 6 pole shaded pole motors, 1.5 to 35 watt power.

4 and 6 pole shaded pole motors with capacitors, 36 to 30 watt power.

3 Phase motors 4 and 6 pole, power up to 350 watt.

Manufacture request with special voltages and frequencies.

Blades made to order for a wide range of application

Blades with various types of materials, ABS + Fiber, Polyamide, Polyethylene, etc.

6mm thick tempered glass

98% Transparency.

Polished edge.

Constant curve radius 1016mm

Development of 738mm curved internal / external 743mm.

6mm thick tempered glass

98% Transparency.

Polished edge.

Constant curve radius 1016mm.

Development of 738mm curved internal / external 743mm.

Powers from 300 Newton to 800 Newton

Special products on demand

Aluminum Construction

Bronze bushings

Stainless Steel allen screw

Temperature settings: Cold 16ºC - 30ºC, Heat 16ºC - 32ºC

Tolerance 1ºC

Compressor relay contact output of 25 Amp. 250 Vac

Fan speed relay contact output of 3 Amp. 250 Vac (03 Fan speed)

4-Way Valve relay contact output of 3 Amp. 250 Vac

110 - 220 V 50/60 Hz. selectable direct conection

Fan speed automatic option. (according to the temperature settings at)